Overview

The SafeCom External Controller and Front-End solution provides pull printing on any networked printer, whatever make and model. This solution might also be preferable to an embedded solution on a printer, which although it supports the embedded software only provides a small 4-line display and no full keyboard.

In conjunction with a SafeCom-supported copier make and model and a suitable SafeCom MFP cable this solution can also be used to control and charge for copying.

SafeCom Front-End

The Front-End's touch-sensitive screen provides the user with full interactivity with the SafeCom system. The Front-End is available with a variety of embedded card readers:

Cotag
Deister
EM
Mag Swipe, Track 1 & 2

HID (35 bit)
HID (37 bit)
iClass
Indala (26 bit)

Indala (29 bit)
Legic
Mifare
Nedap

Front-End image and sample screens

Click to enlarge!

Other Components

SafeCom Overview

SafeCom Pull-Printing

SafeCom Ricoh & Xerox

SafeCom Controller and Front-End

SafeCom Billing

SafeCom Rules-Based Printing

SafeCom Controller

The SafeCom controller is a small device that hosts the pull-print and copy control functionality. It is available with1-port, 2-port or 3-port network hub functionality and supports both Serial and USB identification devices and front-ends.

SafeCom Copy Control Cables

In addition to Pull Printing the SafeCom controller can also be used to control and monitor copying on a wide range of device makes and models:

Please also review these pages to find device makes and models that are supported by SafeCom Go embedded software: SafeCom HP | SafeCom Go other

Make and Models	Notes
Canon
Canon imageRUNNER 1022, 2020, 2200, 3025, 3035, 3300, 4580i, 5000, 5000i, 5020i, 6000, 6000i, 6020i, 3100C
HP
HP LaserJet M3035 MFP, M3027 MFP M4345 MFP, 4345mfp, M5025 MFP, M5035 MFP, 8150mfp, 9000mfp, 9000lmfp, 9040mfp, 9050mfp	A
HP Color LaserJet CM4730 MFP, 4730mfp, CM8050 MFP, CM8060 MFP, 9500mfp	AB
HP LaserJet 9055mfp, 9065mfp	AD
Konica Minolta
Konica Minolta Bizhub C250, C300, C350, C351, C352, C450
Konica Minolta 7022, 7085, 7115, 7118, 7130, 7135, 7145, 7155, 7165, 7222, 7255, 7272
Kyocera Mita
KM-2530, KM-3035, KM-3530, KM-4035, KM-5035	C
Océ
Océ CS CS171, CS175, CS191, CS230
Océ VarioPrint 2045/55/65, 2050-70, 3145E, 3155E, 3165E
Ricoh ⁽¹⁾
450, 650, 1022, 1027, 1032, 1035, 1045, 1060, 1075, 1515, 2015, 2018, 2018D, 2022, 2027, 2035, 2035e, 2045, 2045e, 2051, 2060, 2075, 2090, 2105
1224C, 1232C, 2232C, 2238C, 3131, 3224C, 3228C, 3232C, 3235C, 3245C, 3260C, 5560, CL7000 with Copy Feature Expander Kit	B
Sharp
Sharp MX MX2300N, MX2700N, MX3501, MX4501	AB
Sharp AR AR-C260M, AR-M350, AR-M450
Xerox
Xerox Document Centre 212, 214, 220, 230, 240, 255, 265, 332, 340, 420, 425, 426, 430, 432, 440, 460, 470, 480, 490, 535, 545, 555
Xerox WorkCentre Pro 32, 35, 40, 45, 55, 65, 75, 90, 165, 175, 232, 238, 245, 255, 265, 275, C2128, C2636, C3545
Xerox DocuColor 12, 240, 250, 1632, 2240, 3535
Xerox WorkCentre M24, M118, M123, M128, M133, 7132, 7228, 7235, 7245
Xerox WorkCentre Pro 123, 128, 133

Note: Unless mentioned explicitly the MFPs can only report the number of copied pages and they do not provide information about paper size or use of color and duplex.
A	Supports paper size and duplex information.
B	Supports color detection on a per copy page basis.
C	Page counter is updated at end of copy job and after every 50 or 100 pages depending on model.
D	Page counter is updated at end of copy job.
(1)	The Ricoh MFPs are also supported when sold under the Gestetner, Infotec, Lanier, Nashuatec, Rex-Rotary and Savin brands.